Products
Blenders
Gravimetric
Accurate weighting and reliable discharge
Volumetric
Ideal for simple mixing of crushed materials
Gravimetric synchronized feeder
Weigh the material at the load cell and mix. The weighing error due to the material's shape and size is small, and weighing is more reliable than the capacity measuring type.
Chiller
Water Cooled
Used for temperature control in the lower temperature range (45 - 86°F / 7 - 30°C).
Color sorter
Pellet sorter
Conveyers
Vacuum loader
Used for temperature control in a relatively low temperature zone. (Supply water temperature 50°F (10°C) to maximum temperature 203°F (95°C) to 356°F (180°C)
Dryers
Dehumidifying Dryers [Challenger]
Heat the moisture in the air with the moisture absorbent, heat it, and send it to the drying hopper to dry the resin pellet. Hot air Dryer Dry resin pellets to low moisture even in highly humid plastic enclosures, super engineering plastics, and other resins that cannot be completely dried (hydrated inside the resin).
DFC series
Challenger IV
Conveying Machine Function Integrated
DRC series(30Z, 60Z)
Challenger Compact
Conveying Machine Non-integrated type / General Purpose type
DAA series
Challenger III
Dehumidifying dryer for large size preparation
DFK series
Challenger α
Conveying Machine Function Integrated
DRK series
Challenger α
Conveying Machine Function Integrated
Hot Air Dryers [Ace Dryer]
Heat the atmosphere and send it to a drying hopper with a blower to dry the resin pellet. It is relatively inexpensive compared to other types.
Nitrogen Dryers
Fill the drying hopper with high concentration nitrogen gas and heat dry in low oxygen conditions. Compared to air-heated drying, it reduces yellowing and deterioration of materials. It is mainly used for molding optical parts.
Mixers
High speed
Mix fine particles uniformly in a short time
SMP-2
SUPERMIXER PICCOLO
High Speed Fluidizing Mixer
SMV-10Ba/20Ba
SUPERMIXER
High Speed Fluidizing Mixer
SMV(G) series
SUPERMIXER
High Speed Fluidizing Mixer <br>Variable gelation type
SMV(B) series
SUPERMIXER
High Speed Fluidizing Mixer <br>Variable blending type
SMB series
SUPERMIXER
High Speed Fluidizing Mixer
High speed floating
Mold temperature controllers
Oil Medium Temperature Controllers
Used for temperature control of a relatively high temperature zone. (140°F / 60°C or 176°F / 80 °C to the maximum temperature 320°F / 160°C to 608°F / 320°C)
Water Medium Temperature Controllers
Used for temperature control in a relatively low temperature zone. (Supply water temperature 50°F (10°C) to maximum temperature 203°F (95°C) to 356°F (180°C)
TW/95 series
JUSTTHERMO
Direct Cooling type (Max. 203°F / 95°C)
TW/95-L series
JUSTTHERMO
Direct Cooling type, Low Pressure Type (Max. 203°F / 95°C)
TW/120 series
JUSTTHERMO
Direct Cooling type, High Pressure Type (Max. 248°F / 120°C)
TW/160, 180 series
JUSTTHERMO
Direct Cooling type (Max. 320°F / 160°C) <br>High Pressure type (Max. 356°F / 180°C)
TWK series
JUSTTHERMO
Direct Cooling type
Mold temperature controllers (built-in chiller)
Water medium cold temperature controller
Powder machinery
Feeder
Various supply methods can be selected depending on the application
Weighing
This equipment transports powder by suction, measures, and supplies it
